FAQ

Caption

Dosatori semiautomatici

How do I identify the appropriate filling machine model for my needs?

We have 7 feeder models, from the smallest that doses between 1cc and 38cc to the largest that handles sizes from 200cc up to 5600cc. All models have a min-max dosing range, so it will be necessary to identify the model suitable for filling the largest number of customer formats.

In doing so, however, it must be borne in mind that the model chosen must be centred on the formats: for example, if you mainly need to fill small (20ml) and medium (250ml) doses and occasionally need to work with a larger format (500ml), it will be advisable to opt for a 5-250cc model, which will be more accurate on small doses than a 20-700cc model, while at the same time it will still be possible to fill 500ml with two 250ml doses.

Tappatrici semiautomatiche

How is the dosing volume adjusted?

The volume is adjusted manually through the handwheel with numeric indicator located at the rear of the dispenser. Adjustments are made by disconnecting the compressed air from the machine.

  1. Turn the handwheel to increase or decrease the dispensed volume. Looking at the numeric counter gives an immediate indication of the change.
  2. Reconnect the compressed air and make a dosing test to check whether the set volume corresponds to the desired volume. The second dosage will be reliable as the machine has entered the cycle.
  3. Repeat steps 1 and 2 until the desired volume has been reached. At that point, simply make a note of the corresponding number, to be set the next time.

Once the adjustment has been made, the dispenser will dispense the set amount each time the pedal is pressed.

Macchine automatiche

How is the machine cleaned?

The machine has an on/off switch that allows an initial rinse cycle. Once production is finished, the cleaning product is placed into the hopper and a collection bucket is placed under the nozzle to collect the discharge liquid. Activating the selector switch will simulate continuous dosing, sucking in and dosing the product without stopping. In this way most of the residue is eliminated.

The machine can then be disassembled for more thorough cleaning.

Ask for our tutorial for complete dosing unit assembly and disassembly!